Features
and Specifications
- 468K capacity is enough for 51 full
8K loggers or 13 full 32K loggers or 7 full 64K loggers
- Provides triggered start on location
- Verifies operation of HOBO H6 Family and HOBO Event data loggers
- Resynchronizes HOBO data logger clock with
the PC's clock
- Synchronized relaunch:
sets the HOBO's sample times to be synchronized with the prior
launch's sample times
- Uploads the same data to a PC as if the data
were read out directly from the logger
- One-year user-replaceable batteries
- Battery indication: HOBO Shuttle's battery
status displayed in percent by BoxCar Pro software
- Nonvolatile EEPROM memory retains data even
if battery fails
- One-foot connector cable fits inside case
- Data offload time from logger: <90 seconds
from 8K logger, about 5 min from 32K logger and about 1
min from 64K HOBO Pro logger
- Data offload time to PC: <2 minutes for
full shuttle
- Operating temperature range: -4°F to +158°F
(-20°C to +70°C)
- Operating humidity range when case is open:
0 to 95% relative humidity, non-condensing
- Time accuracy: ±1 minute per week at +68°F
(20°C). The HOBO Shuttle's clock is synchronized to the computer
clock when the HOBO Shuttle is read out or launched
- Case: weatherproof when closed; made from
clear styrene
- Size: 12.1 x 8.9 x 3.8 cm (4.75 x 3.5 x 1.5")
, adjustable cord attached
- Weight: approx. 133.3 grams (4.76 oz.)
*The HOBO Shuttle works with the HOBO H6 Family,
HOBO H8 Family, HOBO H12 Thermocouples, HOBO CO, HOBO H8 Pro
Series (not the Water Temp Pro), and HOBO Event loggers. It
does not work with older versions of the HOBO loggers (i.e.
2K HOBO Temp H01-001-01, HTI, HTEA, HRH, HLI, HPA, HV) or any
StowAway loggers.
|
Easy
to use!
The HOBO Shuttle makes it easy to offload and relaunch loggers
and bring the data back to your PC. As an optional accessory,
the HOBO Shuttle offers the convenience of offloading data from
the logger, testing it and restarting it directly in the field,
without having to bring it back to your PC and then deploy it
again.
Preparation
From your PC use Boxcar Pro software to launch or readout
the HOBO Shuttle which will reset the HOBO Shuttle's clock to
match the host computer's clock. The HOBO Shuttle's clock is then
used to reset the loggers' clocks when they are relaunched.
Offload and relaunch loggers
Connect the logger to the HOBO Shuttle and press the button.
The HOBO Shuttle will offload the data to its nonvolatile EEPROM
memory and then check the logger's battery. If the battery is
good, the HOBO Shuttle relaunches the logger. If the battery is
weak, the HOBO Shuttle will prompt you to replace the battery
before relaunching. In addition, the HOBO Shuttle tests the proper
operation of the HOBO H6 family and HOBO Event loggers before
they are relaunched.
Readout data to your computer
Use BoxCar Pro to readout data to files on your PC for
each logger, which can then be graphed, viewed and exported. |
