• Capacity: 32,530 measurements total
• User-selectable sampling intervals: 0.5 seconds to 9 hours, recording times up to 1 year
• Readout and relaunch with optional HOBO Shuttle
• Drop-proof to 5'
• Mounting kit included (hook/loop, magnet, and tape)
• Programmable start time/date
• Memory modes: stop when full, wrap-around when full
• Nonvolatile EEPROM memory retains data even if battery fails
• Blinking LED confirms operation
• User-replaceable battery lasts 1 year
• Battery level indication at launch
• Operating range: 0°C to +50°C (+32°F to +122°F), 0 to 95% relative humidity, non-condensing, non-fogging
• Time accuracy: ±1 minute per week at +20°C (+68°F)
• Size/Weight: 2.4 x 1.9 x 0.8" (68 x 48 x 19 mm)/ approx. 0.9 oz. (26 gms)

Internal Temperature Sensor
This sensor is also used to measure the cold-junction temperature. The thermocouple readings are compensated in the logger regardless of whether this channel is selected.

• Internal Range: 0°C to +50°C (+32°F to +122°F)
• Internal Resolution: 0.4°C @ +21°C (0.7°F @ +70°F)
• Internal Accuracy: ±0.7°C @ +21°C (±1.3°F @ +70°F)
  

  

Thermocouple Probes and Wires

All probes have standard subminiature thermocouple connectors and plug directly into HOBO Thermocouple Family loggers. The connectors are color-coded for type J (black), K (yellow), and T (blue) thermocouples according to the ANSI standard. Note that the accuracy specifications are for the probes only, and must be added to the logger's accuracy to determine the combined measurement accuracy.

Beaded Thermocouple Probes on Spool Caddies
These exposed-junction thermocouple probes include 6' of insulated 30-AWG wire wound on an integrated spool caddy/subminiature connector.

Type J
Range: +32°F to +482°F (0°C to +250°C)
Initial Accuracy: ±2°F (±1.1°C)

Teflon Insulation*

Type K
Range: +32°F to +545°F (0°C to +285°C)
Initial Accuracy: ±2°F (±1.1°C)

Range: +545°F to +900°F (+285°C to +482°C)
Initial Accuracy: ±0.4%***

Glass Braid Insulation**

Type T
Range: -330°F to -85°F
(-200°C to -65°C)
Initial Accuracy: ±0.8%***

Range: -85°F to +270°F (-65°C to +130°C)
Initial Accuracy: ±0.9°F (±0.5°C)

Range: +270°F to +356°F (+130°C to +180°C)
Initial Accuracy: ±0.4%***

Teflon Insulation*

Range: +32°F to +559°F (0°C to +293°C)
Initial Accuracy: ±4°F (±2.2°C)

Range: +559°F to +1650°F (+293°C to +900°C)****
Initial Accuracy: ±0.75%***

HOBO Type J Thermocouple (part number H12-001)

Range	Max./Min. Res.	Accuracy
0°C to +250°C (+32°F to +482°F)	1°C / 2°C (1.8°F / 3.6°F)	±3.2°C @ +125°C (±5.7°F @ +257°F)
0°C to +750°C (+32°F to +1382°F)	3°C / 6°C (5.4°F / 11°F)	±8.5°C @ +375°C (±15.3°F @ +707°F)

HOBO Type K Thermocouple (part number H12-002)

Range	Max./Min. Res.	Accuracy
0°C to +500°C (+32°F to +932°F)	2°C / 4°C (3.6°F / 7°F)	±6°C @ +250°C (±10.8°F @ +482°F)
0°C to +1250°C (+32°F to +2282°F)	5°C / 10°C (9°F / 18°F)	±14°C @ +625°C (±25°F @ +1157°F)

HOBO Type T Thermocouple (part number H12-003)

Range	Max./Min. Res.	Accuracy
-200°C to +50°C (-328°F to +122°F)	1°C / 6°C (1.8°F / 11°F)	±4°C @ -75°C (±7.2°F @ -103°F)
-70°C to +180°C (-94°F to +356°F)	1°C / 3°C (1.8°F / 5.4°F)	±3°C @ +55°C (±5.4°F @ +131°F)

Note: The accuracy plots show the worst case error for the different loggers and their ranges. Please note that this does not include any error associated with the attached thermocouple.

Thermocouple Wires
100' coils of insulated 24-AWG thermocouple wire

Type J
Range: +32°F to +482°F (0°C to +250°C)
Initial Accuracy: ±4°F (±2.2°C)

Teflon Insulation*

Type K
Range: +32°F to +545°F (0°C to +285°C)
Initial Accuracy: ±4°F (±2.2°C)

Range: +545°F to +900°F (+285°C to +482°C)
Initial Accuracy: ±0.75%***

Glass Braid Insulation**

Type T
Range: -330°F to -85°F (-200°C to -65°C)
Initial Accuracy: ±1.5%***

Range: -85°F to +270°F (-65°C to +130°C)
Initial Accuracy: ±1.8°F (±1°C)

Range: +270°F to +356°F (+130°C to +180°C)
Initial Accuracy: ±0.75%***

Teflon Insulation*

Warranty: Thermocouple Loggers are intended for indoor use. They have not been tested or are not guaranteed for outdoor use. Thermocouple probes, connectors, and wires are warranted for manufacturing defects on receipt only.

* Teflon insulation is rated up to +400°F (+200°C) continuous, and +482°F (+250°C) for 24 hours.
** Glass braid is rated up to +900°F (+482°C) continuous, and +1000°F (+537°C) for single exposure.
*** Percentage is of degrees above or below ice point (+32°F or 0°C)
**** Probe is rated up to +1650°F (+900°C) continuous, and +2282°F (+1235°C) for one-hour exposures.